How to create a nocfe firmware?

[Tony2k]

I have the last firmware by Dynalink but I can't flash my se515 because there is the cfe control, somebody know wat I have to do to remove it?

[hph]

I'm soooo lazy ... gimme some time. I will post scripts, binaries and a description ... maybe this weekend.

HP

[Tony2k]

Thank you, I will wait for news!

[Tony2k]

Peter, have you got news?

[hph]

Do you speak some german? here is it.

HP

[Tony2k]

I have to use linux or I can also with windows?

[hph]

Sorry, the binaries are compiled for Linux only. Never tried to do something like that under Windows ...

I haven't tried that but I think it could be done under Knoppix.

HP

[Tony2k]

Sorry, I had tried but I know nothig about linux.. Some one that's able can make the modify? In the attacment you can find the new firmware. Thank you!

[Tony2k]

Nobody?

[flip]

Hello Tony,

did it my first time and hope it is ok. I just removed the loader.
I wonder, if i can replace the Annex A part by the Annex B part of
of the SE515?
I'll have a closer look at it, if i have some spare time...

Sorry, uploading to the forum doesn't work. You can download it
from http://home.arcor.de/flip/downloads/firmware.bin

[Tony2k]

Thank you flip for you attempt but the firmware never work, there is always the same error.. The Annex A standard it's right for my line.

[hph]

Tony,

choice 1: get yourself a cheap serial cable from a mobile phone and attach it to the serial console of the se515. From there you can safely flash whatever you want. (risk low)

choice 2: Flash any flashable firmware WITHOUT CFE that you like and uplug the power while flashing. You will have a recovery mode after switching it on again. The recovery accepts more firmwares then the usual. (risk low if you use a no-cfe firmware, if not ... you might have to get a JTAG cable ...)

HP

[Tony2k]

Can you give me more infos about the first choice? All the document about recovery mode are offline...

[Tony2k]

Perfect, now the router it's KO.. What I have to do to enter in the recovery mode??

[flip]

Hi Tony,

if you understand a little german have a look at this

In short words: try, if you have a recovery-web-interface
from your se515 at  http://192.168.1.1


HTH,
 Dieter